skip to main
|
skip to sidebar
Building a 19' Banks Dory
Saturday, June 20, 2009
Making the Rub Rail
I am cheating here by using photos that have already been posted. Review the post from January and February.
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.
Newer Post
Older Post
Home
Subscribe to:
Post Comments (Atom)
Places to remember...
Spira
Ask a question
bentrim65 (at) gmail.com (boatbuilder)
copperhaus (at) gmail.com (customer)
Blog Archive
►
2010
(9)
►
February
(9)
Is that a compliment
removing the strong back
flipping it over
the painted hull
what I did to apply the urethane.
something I suck at
filleting the rub rail
A blister in the glass
Managing my blog
▼
2009
(76)
►
August
(2)
Just incase someone needs reminded what I am worki...
Down for the Count
▼
June
(10)
Some Pictures of the Oysterman in Action
Cutting the Rub Rail at the Transom
Cutting the Rub Rails at the Bow
Attaching the Rub Rail
Making the Rub Rail
Repeat the Fairing
Called the Epoxy Manufacturer
Sand, Sand, Sand and Sand
The Aftermath of Fairing
Hey
►
April
(11)
1st Coat of Fairing
Prepping for Fairing
Epoxying the Side
Glassing the Sides
How to Cut and Fold the Ends
Laying the Glass on the Bottom
Taping the Bottom Seam with 3" Glass
Wood Saturation
Wet on wet? No, not mud wrestling. Epoxy.
The Epoxy Mix and Trading Out
Filling the Seams and Screw Holes
►
March
(16)
The Epoxy and Fairing Compound
Laying Out the Glass
Thought on Epoxy
Floor Protection
A Little More Work on the Transom
Trimming the Plywood to the Sheer Clamp
A Word on Epoxy
Shaping the Bow
Fairing the Bottom and Transom Edges
Glue and Screw the Bottom On
Bottom Panels
Transom Panel
Fairing the Sides
I Glassed it Today
I am Slacking
Oh Yes! Time to Skin it with Plywood
►
February
(12)
Ok, I'm at this point. But, I will fill in the ste...
6 Hours of Bolting. Ugh.
►
January
(25)
►
2008
(5)
►
December
(5)
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.